Wisenet TNO-X6072EPT1-Z, Руководство по установке

Страница: 6 / 28

STANDARDS & CERTIFICATIONS
STANDARDS-
The equipment is manufactured in accordance with the IECEX scheme, the ATEX Directive 2014/34/EU and
with the following standards :
IEC 60079-0:2011
IEC 60079-1:2014
IEC 60079-31:2013
IEC 60529:2013
EN 60079-0:2012 + A11:2013
EN 60079-1:2014
EN 60079-31:2014
EN 60529:1991 + A1:2000 + A2:2013
ANSI/ISA 60079-0:2013
ANSI/UL 60079-1:2015
ANSI/ISA 60079-31:2015
ANSI/IEC 60529:2004
CAN/CSA-C22.2 No. 60079-0:2015
CAN/CSA-C22.2 No. 60079-1:2016
CAN/CSA-C22.2 No. 60079-31:2015
CAN/CSA-C22.2 No. 60529:2016
Specific Conditions of Use:
-The flameproof joints of the equipment are not intended to be repaired. Consult the manufacturer if dimensional
information on the flameproof joints is necessary.
-Follow the manufacturer’s instructions to reduce the potential of an electrostatic charging hazard on the surface
of the equipment in Group II and III environments.
NOTE: Use a clean cloth dampened with pure water for cleaning.
CERTIFICATIONS-
CERT NO. FM18US0262X & FM18CA0126X
US: Class I Division 1 Groups BCD T6 Ta= -40°C to +55°C, Type 4X, IP66
Class II/III Division 1 Groups EFG Ta= -40°C to +55°C, Type 4X, IP66
Canada: Class I Division 1 Groups BCD T6 Ta= -50°C to +55°C, Type 4X, IP66
Class II/III Division 1 Groups EFG Ta= -50°C to +55°C, Type 4X, IP66
Class I, Zone 1, AEx/Ex db IIB+H2 T5 Gb Ta = -50°C to +55°C, Type 4X, IP66
Zone 21, AEx/Ex tb IIIC T85°C Db Ta = -50°C to +55°C, Type 4X, IP66
CERT NO. FM18ATEX0073X & IECEx FMG 18.0029X
II 2 G Ex db IIB+H2 T5 Gb Ta = -50°C to +55°C, IP66
II 2 D Ex tb IIIC T85°C Db Ta = -50°C to +55°C, IP66
6