Wisenet TNO-X6072EPT1-Z, Руководство по установке

Страница: 13 / 28

TNO-X nnnn EPT1-Z Series Casing Material Specifications
ALUMINUM 15lbs
NOTE: Spectrum Camera Solutions, LLC is NOT responsible for any
misuse or improper installation of product, assumes no liability for special
or consequential damages caused by use or misuse or improper
installation of its products sold and assumes no liability for injury from use
or misuse or improper installation of its products or attached products.
SPECIFICATIONS
Power Source Specification For TNO-X6072EPT1-Z, TNO-X8072EPT1-Z,
TNO-X6322EPT1-Z
The power supply used with this product shall have a rated output voltage within voltage
range of 8-28 V DC. The power supply shall also fulfill one of the following requirements: •
Safety Extra Low Voltage (SELV) according to clause 2.2 of IEC/EN/UL 60950-1 and
Limited Power Source (LPS) according to clause 2.5 of IEC/EN/UL 60950-1 or CEC/NEC
Class 2 source of supply as defined in the Canadian Electrical Code, CSA C22.1 and
National Electrical Code, ANSI/NFPA 70 • Class 1 electrical energy source (ES1) and
Class 2 power source (PS2) rated output power limited to ≤100 W according to IEC/EN/UL
62368-1. When used with Power over Ethernet (PoE) the Power sourcing equipment
(PSE) shall comply with IEEE 802.3af/802.3at and Limited Power Source (LPS) according
to clause 2.5 of IEC/EN/UL 60950-1 or annex Q of IEC/EN/UL 62368-1.
Grounding Specification For TNO-X
nnnn
EPT1-Z
For U.S zones, the internal grounding connection shall be used and the external grounding
connection shall be a supplemental ground connection. The product shall be grounded
either through a shielded network cable (STP) or other appropriate method.
13