Wisenet TNM-3620TDY, Руководство пользователя

Страница: 7 / 22

English _
7
!
OVER
VIEW
AT A GLANCE
Front Side
Item Description
a
Visible lens Used to see the visible view.
b
Thermal lens
Used to detect and measure the infrared energy of an object.
c
Screw hole for installation
Used to fix the camera on a tripod.
` The screw size : It is the specification for the screws used to fasten the camera to the
support.
1/4” -20 UNC
L: 4.5mm±0.2mm (ISO Standard), or 0.197” (ASA Standard)
M ` Any tripod is not included. For more information to use a tripod, refer to the product’s documentation.
Rear Side
Item Description
a
GND Terminal
Used to discharge a lighting or a surge current outside in order to protect a camera from it
safely.
b
Micro SD card
Compartment
Compartment for the Micro SD card.
c
PoE+ port
A port that connects to the PoE+ injector and network cable for power and network
connection.
d
Power port (DC 12V) Used to plug the power cable.
e
MICRO USB port
Port to connect the WiFi dongle.
You can check the installation video through the applications installed in the smartphone.
Refer to “
Connect to WiFi dongle
” on page 9.
` Wifi dongle and OTG adapter are sold separately.
f
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
g
Test monitor out port
Output port for test monitoring the video output. Use the test monitor cable to connect to a
mobile display and check the test video.
h
Audio/Alarm cable port Port to connect audio and alarm cables.
b a c
c d e f h g
a b