Wisenet SNH-V6435DN, Руководство пользователя

Страница: 11 / 23

11
02
Installation & Network Connection
6. Repeat Step 5 for the [ trans ] cable.
7. Put the chime cover back on once you are
finished.
n
`
Make sure to tuck the cables and Power Stabilizer
box into an open space within the chime before
putting the cover back on.
4. Use a screwdriver to loosen the screws
on the [ FRont ] and [ tRanS ] terminals
and then remove the cables.
n
`
Make sure to label the terminal cables
before disconnecting them. You will need
to connect them to the terminal blocks
later.
5. Connect Power Stabilizer to Chime
5-1 Pull up the orange levers on the terminal block.
5-2 Insert the Power Stabilizer cable into one of the slots
and push the orange lever back down.
5-3 Insert the wire labeled “Front”
into the remaining opening of
the terminal block.
5-4 Insert the Power Stabilizer
cable into one of the slots and
push the orange lever back
down.
n
`
Make sure the end of the wire is
properly aligned to the metal strip
before closing the orange lever.
FRONT
TRANS
REAR
FRONT
TRANS
REAR
FRONT TRA
NS
REA
R