Wisenet SmartCam D1, Руководство по установке

Страница: 8 / 16

8
Connecting the Power Stabilizer to the Chime
4
Connect Power Stabilizer to Chime
a
Pull up the orange levers on the terminal block.
b
Insert the Power Stabilizer cable into one of the
slots and push the orange lever back down.
c
Insert the wire labeled “Front” into the remaining
opening of the terminal block.
d
Attach the L-shaped end of the Power Stabilizer to
the [Front] terminal on the Chime.
k `
Make sure the end of the wire is properly aligned to the
metal strip before closing the orange lever.
5
Repeat Step 4 for the [Trans] cable.
6
Put the chime cover back on once you are finished.
k `
Make sure to tuck the cables and Power Stabilizer box into
an open space within the chime before putting the cover
back on.
FRONT
TRANS
REAR
Pre-existing
chime cable
Power Stabilizer
cable
FRONT
TRANS
REAR
FRONT
TRANS
REAR
Pre-existing
chime cable
Power
Stabilizer cable
FRONT
TRANS
REAR