Wisenet SmartCam D1, Руководство по установке

Страница: 7 / 16

7
Connecting the Power Stabilizer to the Chime
1
Open the cover on your existing chime.
J `
Before you start, you must turn off the circuit breaker for
safety purposes.
2
Open the "Power Stabilizer Kit" and insert the wire
connector into the Power Stabilizer Box.
3
Use a screwdriver to loosen the screws on the [FRONT]
and [TRANS] terminals and then remove the cables.
k `
Make sure to label the terminal cables before disconnecting
them. You will need to connect them to the terminal blocks
later.
VIDEO
DOORBELL
Power Stabilizer
FRONT TRA
NS
REA
R
※
Scan the QR code or enter “ www.wisenetlife.com/news/video/smartcam.mp4 ” for video instructions to guide you through the D1 doorbell installation process.
※
Download a QR Code app to scan the QR code.
※
To see the video installation guide, go to www.wisenetlife.com > Products > SmartCam > SmartCam D1(SNH-V6435DN) > “Video” tab.