Wisenet QNP-6320HS, Руководство пользователя

Страница: 8 / 23

overview
8_
overview
AT A GLANCE
Appearance
Item Description
a
Housing Protects the internal PTZ mechanism from direct sunlight, external shock, and corrosion.
b
Dome Cover
Dome cover for the lens and unit protection.
c
Micro SD card slot Compartment for the Micro SD card.
d
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
Inside
Mounting surface
Item Description
a
Cable bushing
A waterproof rubber cap, which allows a network cable to go through it.
b
Network Port Port for connection with the network using an Ethernet cable.
a
b
c
d
a
b