Wisenet QNP-6250, Руководство пользователя

Страница: 16 / 35

PTZ camera (QNP-6320H/QNP-6250H)
16_
PTZ camera (QNP-6320H/QNP-6250H)
Inside
Item Description
a
Lens
Lens for the camera.
b
Micro SD Card cover Dust-resistant cover for the Micro SD card slot.
c
Micro SD Card slot Compartment for the Micro SD card.
d
Reset button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
a
b
d
c
Mounting surface
Item Description
a
Cable bushing A waterproof rubber cap, which allows a network cable to go through it.
b
Safety wire hook
Hang this hook on the safety wire of the mount when installing this product to prevent it
from falling.
c
Network port
A port that connects to the PoE+ router and network cable for power and network
connection.
a
b
c