Wisenet PRN-1600B2, Руководство пользователя

Страница: 54 / 129

54_
setup
setup
Setting camera password
You can change the passwords of all registered cameras at once.
You can register the camera’s ID and password.
Setup > camera > camera password
●
Password : Enter the new password for the factory default camera according to the password setting rules.
The initial password for the camera must be entered.
●
Confirm password : Input the new password again.
●
ID : Enter the ID of the camera whose ID and password are set.
●
Password : Enter the password of the camera whose ID and password are set.
￭
When the password is in factory reset, it can be changed and managed in a batch.
￭
If you click < >, a basic guide for password setup is displayed.
￭
If you select <
Show password
>, the current password is displayed as the actual input characters.
￭
If you check the <
Change the password of all registered cameras
>, the passwords of all cameras are changed with the entered
password.
￭
Up to 3 sets of camera ID with password and password can be registered.
You can use the registered camera ID/PW to automatically discover and register the camera from the "
Channel setup > Auto detect "
screen.
￭
A camera password registered with ONVIF and RTSP cannot be changed.
Dynamic goV/fpS setup
Dynamic GOV can be used to automatically change the length of GOV depending on the video condition. For
details, refer to the camera's help or the product's user guide.
At the bottom of the <
Detailed profile configuration
> screen, press the <
Dynamic goV & fpS
> button to
open the dynamic GOV/FPS setup popup for the channel.
●
Profile : Shows the video profile of the connected camera setting.
●
Dynamic FPS : Automatically adjusts the frame rate (frames per second) based on the video conditions.
●
Dynamic GOV
– Mode : Set the GOV length to change automatically.
– Length : Enter the maximum GOV length value to be applied when there is no motion in the video.
Minimum GOV value can be set on the camera web page.
– Range : The range of the input value of < Length > is displayed.
￭
Any profile not supported with the dynamic GOV/FPS setting is marked with '-'.