Wisenet PRN-1600B2 Скачать руководство пользователя

Страница: 43 / 129

English

_43

You can play the recorded data and export the video you want during playback.

Screen Layout of the pLay

item

Description

Video control

You can use the video control function.

￭

: Runs a smart search by specifying an area in the video window.

￭

: Saves the video screen as an image.

￭

: Zooms in the selected area on the screen. It only runs on a single split screen.

￭

: Displays the image rotated 90 degrees. (This function is not supported in some models.)

￭

: Turns the sound on or off.

￭

: Changes the video display ratio.

￭

: Enters the setup mode for dewarping the fisheye camera.

It works only when the video resolution is 1:1. Some models do not support this function.

Overlap

The list will be displayed according to the number of overlapped data in the same time zone.
It will appear when a video is overlapped in one channel due to time or time zone change at the selected time.

Export section

Turns the export section setting on or off. You can select a start time and end time for exporting.

Export

You can export the video of the channel you are playing.

Filter

You can filter the event items to see the time line.

Channel

The channel and camera name will be displayed.

item

Description

Playback control

You can control video playback.

Date/Time

Set the date/time.

Time line

Move the playback position and display event data.

Show/Hide Channel

You can change the number of channels displayed in the time line.

￭

Up to 4 channels of time line can be displayed.

Status

You can check the live, recording, and network status.

Remove all tiles

Removes all screens from the video window.

Full aspect ratio

Change the video display ratio.

Full screen

Display the image enlarged to full screen.

Previous/

Next Channel

You can check the time line of the previous/next channel.

play

• p

Lay

Содержание PRN-1600B2


































































































































Результаты поиска

Содержание PRN-1600B2

Отзывы:

Похожие инструкции для PRN-1600B2

Бренды по названию

Популярные бренды

Wisenet PRN-1600B2, Руководство пользователя

Результаты поиска

Содержание PRN-1600B2

Отзывы:

Похожие инструкции для PRN-1600B2

Бренды по названию

Популярные бренды