background image

English _

17

 

!

INST

ALLA

TION & CONNECTION

Outdoor installation

When you install it outside of the building, please waterproof it with waterproof butyl rubber tape (can be 
purchased in stores) so that water does not leak from the gap of the cable connected to the outside.

1. 

Connect the network cable.

2. 

Wrap the black cable jacket (Area A) and the cable connection 
area with waterproof (butyl rubber) tape so that more than half of 
the butyl rubber tape is overlapped.

 

J

 

`

If the cable jacket is not waterproofed properly, then it can directly cause leakage. Make sure to protect the cable with a 
dense layer of taping.

 

`

Waterproof butyl tape is made of butyl rubber that can be stretched to twice its normal length.

Adjusting the monitoring direction for the camera

Pan

Tilt

Rotation

 

`

Adjusting the monitoring direction

You can adjust the camera direction only when the camera is fixed on the ceiling. 
Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the 
lens on its axis is called Rotation.

 

- The pan angle is 0˚ – 355˚.

 

- The tilt angle is 0˚ – 78˚.

 

- The rotation angle is 0˚ – 180.

 

J

 

`

The image can be covered up by the camera case depending on the angle.

 

`

Do not pan over the specified rotation angle. It might damage the cable leading to a product malfunction.

 

`

Methods of adjustment

1. 

After installing the camera, adjust the panning angle in consideration of the monitoring direction.

2. 

Adjust the tilt angle so that the camera faces toward the monitoring object.

3. 

Adjust the horizontal angle so that the video does not flip when rotated.

Содержание PNM-C12083RVD































Отзывы: