Wisenet PNM-8082VT, Руководство пользователя

Страница: 8 / 27

overview
8_
overview
Components
Item Description
a
Lens 3 camera lenses show different directions.
b
PoE+ port
This port connects power and network via PoE+ injector.
c
Blower Fan
Prevents overheat and moisture inside the camera.
d
Micro SD card slot Compartment for the Micro SD card.
e
Channel DIP Switch
Change the DIP switches to specify the channel you want to use to view the installation
video.
f
Zoom/Focus Control Button
T Zoom in (Tele)
W Zoom out (Wide)
N Focusing on a near object (Near)
F Focusing on a far object (Far)
Focus Control Press this button for automatic focus control.
Item Description
g
Test monitor out port
Output port for test monitoring the video output. Use the test monitor cable to connect to a
mobile display and check the test video.
h
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
b
a
c
e
h
g
f
d