English _
11
●
●
INST
ALLA
TION & CONNECTION
4.
Connect a cable to the camera. Be careful not to damage the cable. It should be trimmed up.
5.
If the lens module is not attached correctly,
the lens module status light will illuminate
red, as shown in the figure. If this occurs,
turn off the power switch and reattach the
lens module.
If attached normally, it will illuminate green
and then turn off after approximately 40
seconds.
6.
Push it until it clicks into the mounting clip as shown in the figure.
7.
Use the camera fixing screws to fix the camera body to the
mounting plate.
Installation on a ceiling or wall
1.
Use the provided template to drill holes for installation (diameter
6 mm and minimum depth 45mm) and insert the supplied plastic
anchors to the end.
2.
Align the moun.ting hole of the camera with the hole where the
plastic anchor is inserted, then tighten the tapping screw.
3.
Mount the camera body to the mount plate.
`
Mount it to fit the hinges as shown in the image.
Содержание PNM-7002VD
Страница 1: ...NETWORK CAMERA User Manual PNM 7002VD SLA 2M2402D SLA 2M2802D SLA 2M3602D SLA 2M6002D ...
Страница 24: ......
