Wisenet HCP-6230, Руководство пользователя

Страница: 67 / 93

English
- 67
●
setup
auto run
If there is no controller operation by the user for a certain time, the
sequence operation designated by the user will be executed.
z
mode :
- HOME : Auto run Home Position (Refer to the Preset Menu.)
- PRESET : Auto run a selected preset number.
- SWING : Auto run a selected Swing mode.
- GROUP : Auto run a selected Group mode.
- TOUR : Auto run a selected Tour mode.
- TRACE : Auto run a selected trace mode.
- A.PAN : Auto run a 360-degree pan. To activate the panning
command, you need to set up the camera’s tilt
angle and auto pan speed manually.
- SCHEDULE : Execute Auto Run on the selected day of the
week.
z
Time :
Enables setting up an Auto Run duration. (The duration can be 5~30
seconds, or 1~5 minutes.)
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status

Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON

Auto Run
Mode
OFF
Time 30 SEC