Wisenet HCF-8010V, Руководство пользователя

Страница: 23 / 28

English_23
●
C
A
MER
A
OPER
ATION
y
DAY/NIGHT:
You can display pictures in color or in black and white.
➊
Select <DAY/NIGHT>.
➋
Select each item and set it properly.
-
AUTO : The mode is switched
to ’Color‘ in a normal
environment, but switches
to ’B/W‘ mode when
ambient illumination is low.
To set up the switching
time for AUTO mode, press
the Function Setup switch. You can turn on or off the burst signal on B/W
mode.
y
BURST : Activate or deactivate the burst mode to maintain or remove the color
signal.
y
DURATION : This function is used to select the brightness of light where
switching occurs.
y
DWELL TIME : You can select day/night switching delay time from.

3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
M
`
If you set the AGC mode to off on the exposure menu, you cannot switch the day/night
mode to auto.
`
When a bright light source is in the screen or there are frequent brightness changes, if
you use the auto night/day mode, and set the switching time to short (3, 5 sec), a hunting
can be caused. In this situation, it is recommended to use the default setting (30 sec).
- COLOR : The picture is always displayed in color.
- B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
EXIT
y
SAVE&END :
Save the current settings and exit the MAIN SETUP menu.
y
NOT SAVE :
Do not save the current settings and exit the MAIN SETUP menu.
y
RESET :
Revert camera to factory settings.
D&N AUTO

1.
BURST MODE ON
2.
DURATION NORMAL
3. DWELL TIME 30 SEC
4.
RETURN