6
Unpacking & Installing the P20
The Wisdom Audio Sage P20 freestanding speaker is a substantial piece of
equipment. Please exercise caution when unpacking your P20 to ensure that you
do not strain yourself from its (perhaps unexpected) weight.
CAUTION:
Do not attempt to lift your P20 while bending or twisting from the
waist. Use your legs for lifting, not your back. Always stand as straight as possible
and keep the P20 close to your body to reduce strain on your back.
The speaker is shipped in a “telescoping” box (two five-sided boxes, one of which
fits snugly inside the other). Gently roll the box over so that its bottom is facing up.
Then carefully cut the tape along the bottom of the box on all four sides. Roll the
box over again so the bottom is on the floor, and lift off the top. With one person
at each end, carefully lift the speaker out of the box and lay it on a soft surface
(carpet or similar). We do not recommend removing the grille on your new
loudspeakers. The grille is an integral part of the design; moreover, the planar
magnetic film should never be touched, as it is tensioned precisely at the factory.
The grille plays an important protective role as well as an aesthetic one.
After unpacking your P20, keep all packing materials for future transport.
In the
event that you need to ship your speaker, only the original, purpose-designed
shipping carton is acceptable. Any other method of shipping this product runs a
significant risk of damage to the speaker - damage that would not be covered by
the warranty. (If you lose your packaging and need to ship your speakers,
replacement packaging can be purchased from Wisdom Audio.)