8
WPS-550-DOM-IP Installation Manual
3. Package Contents
NOTE: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA.
The PS-12DC-1A, WPS-PS multiple output power supply
or a Power over Ethernet (PoE) switch is recommended.
4. Required Items for Installation
The following items are required during the installation of a Wirepath™ IP camera. Prepare all parts and tools in advance to ensure
that the installation can be performed smoothly.
• Local Ethernet network installed
•
All cameras to be installed in the system
• PoE Ethernet equipment or power supplies and wiring to power cameras
• Network connection at each camera location
• Access to a PC connected to the local network
• Static IP address to assign to the camera
• Additional access information for network equipment:
•
Router / Switch Details – Contact the network admin to obtain access to equipment settings.
•
Admin Rights – Required to setup the network and port forwarding for remote access.
•
Default Gateway
•
Subnet Mask
•
DNS Address
• Recommended for mounting cameras and wiring:
•
Hand tools
•
Drill (May be needed for mounting the camera)
•
Extra connectors for terminating cables on the job
•
(1) WPS-550-DOM-IP Camera
•
(1) WPS-ACC-PWR Power Adapter
•
(1) Female to Female RJ45 Adapter
•
(1) 3mm Allen key
•
(4) Screws
•
(4) Wall Fasteners
•
(1) Spare Silica Pack
•
(1) Quick Start Guide
Содержание WPS-550-DOM-IP
Страница 63: ...140811 2100 2014 Wirepath Surveillance...