W-DMX MicroBox G6
2022-09-30
User interface
Though the interface display appears simple, there is a lot of information you can read back, which will
help you properly set up your system and help you understand how your devices are operating.
Figure 2:
Front panel overlay
1.
BATTERY
Not used on the MicroBox series.
2.
SIGNAL
Indicates that the Signal status is showing signal strength.
3.
SIGNAL STATUS
On a receiver; indicates the received signal quality. On a transmitter; indicates
the configured output power.
4.
TX
Device is operating as a transmitter.
5.
RX
Device is operating as a receiver.
6.
LINK
On a transmitter; states it’s ready to establish a link. On a receiver;
• Off: not linked to any transmitter
• On: active link from a transmitter
• Blinking: Linked to a transmitter but link is lost [either the transmitter is outof-range or turned
off].
7.
DMX
Indicates whether DMX data is present.
8.
MODE
Indicates the radio mode [See chapter 3.4].
9.
RDM
Flashes when there is RDM traffic activity.
10.
PWR
States power condition of the device.
11.
WIFI
Not used on the MicroBox series.
12. Red function button.
Wireless Solution Sweden AB
7
