TWO IN ONE 2000M-H FULL-HD
WIRELESS VIDEO TRANSMISSION
MANUAL BOOK
© 2018 Wireless Prime INC. All Rights Reserved.
01
02
About the User Manual
This Manual details the product specifications, instructions for use,
precautions, and troubleshooting. Read the Manual carefully before using
the product. If you have any questions or difficulties in using this product,
contact the company or the seller in time.
Product Features
BeamLink Quad is a set of 4TX-to-1RX full-HD audio and video wireless
transmission system. The 4 video channel transmission shares one wireless
channel and supports the highest video resolution up to 1080P/60Hz.
This system is based on 5G wireless network technology for transmission,
along with advanced 4×4 MIMO and Beam-Forming technology. Image
processing is performed using H.264 coding-decoding technology,
and the video quality is sharp and the latency is lower.
Brief Introduction
This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD
input and output, with the highest resolution of 1080P/60Hz. With the use of H.264
coding-decoding technology with high compression ratio and high definition,
the images have high definition, and the latency is as low as 70ms.
4 transmitters and 1 receiver share one wireless channel
Beam-Forming
Combined with 4×4 MIMO and Beam-Forming technology, this product has
advantages over other WiFi products in the market in terms of transmission
distance and image bitrate. Beam-Forming technology makes wireless signals
more concentrated and stronger in the direction from which they are transmitted
to the receiver, allowing them to transmit farther and be less susceptible to
interference from other signals, thus making them more stable.
Packing List
The following items are included in the product package
Notice: The transmitter comes with the Sony NP-F type battery dock and has
preassembled V-mount connector. The receiver has preassembled V-mount battery
plate and V-mount connector.
This product supports 4 channel videos simultaneous input, with resolution
up to 1080P60 per channel. 4 channel videos shares one wireless channel,
which greatly saves spectrum resources and provides great convenience for
users to perform multi-camera shooting.
High-quality and ultra low latency
This product supports switching between two operating modes, namely standard
mode and RTSP streaming mode. In standard mode, this product supports
4TX-to-1RX and 4TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.
In RTSP streaming mode, this product supports 4TX-to-1RX and 4TX-to-2RX,
and the video streaming interface is LAN port(RJ45) ..
Support
RS232/422
This
product
supports
signal
transmission
via
RS232
/
422 interface
,
which
is
convenient
for
users
to
control
the
transmitting
terminal
through
the
device
at
the
receiving
terminal
,
such
as
the
PTZ
.
controlling
Support monitoring on mobile devices
This product supports monitoring on portable devices, like mobile phone,
tablet and PC. User can install live streaming tool supporting RTSP like VLC
on mobile device, and connect portable devices with receiver via WiFi to watch
the live video with different transmitter IP address.
Standard mode and streaming mode
Power supply cable
*4 pieces
Transmitter *4 pieces
Antenna
* 16 pieces
Receiver *1 piece Antenna *4 pieces
Power adapter *1 piece Metal Stand *1 piece
Double screw the
connector*4 pieces
Rs232 cable
*4 pieces
RS232 cable
*1 pieces
