Wintriss WPC 1000, Руководство пользователя

Страница: 158 / 235

WPC 1000 User Manual 1125100
Operation 4-5
Resetting the Counter Value to Zero
To reset the displayed counter value to zero, do the following:
1.
With the “Counter” segment illuminated and the current counter value displayed, turn the
WPC Settings key switch to “–” (clockwise). The LED display will reset to 0 (zero).
The next time you operate the press in Single-stroke or Continuous, the counter will begin
counting from “1.”
Setting and Maintaining the Counter Preset Value
The counter preset feature allows you to set a stroke count that WPC 1000 uses to stop the
press after the specified number of strokes. This feature is useful for batch sizing and making
periodic QC checks.
When the counter reaches the preset value, WPC 1000 sends a Top-stop signal to the press
and displays the F15 fault code on the digital LED display (see Operational Faults, page 5-6),
indicating that the counter preset has been reached. Press the Reset/Select button to clear the
counter, returning it to zero. The counter then starts counting again from one (1). The counter
preset value will remain the same until you set it to something different.
You can set the counter preset to values from 1 to 999999.
To disable the counter preset function, set the preset value to zero (0). See Disabling the
Counter Preset, page 4-6.
Setting the Counter Preset
To set the counter preset value, do the following:
1.
Press the Reset/Select button repeatedly until the “Counter Preset” indicator segment
illuminates. The digital display shows the current counter preset value, as shown in
Figure 4-2, page 4-6.