Wintriss SmartPAC2, Руководство пользователя, Страница: 259 / 383

1126700 SmartPAC 2 User Manual
A-14 Preventive Maintenance Monitor
3.
The next display shows that one of the items, “Slide Adjust Motor,” is now in “alert”
status mode. It flashes on the screen. Also, the number of items in alert status mode
appears at the top of the screen.
4.
To view other items in the schedule that may or may not be in “alert” status, use the cursor
keys. If more than three PM items were set in Initialization, they will not all appear on the
screen. To view them, simply use the cursor keys to scroll down the list.
5.
To clear the alert, first highlight that item, press the appropriate function key (designated
on your screen), and enter the PM password.
6.
If you want to change the frequency value on a given PM item, first highlight that item,
press the designated function key, and enter the PM password. The number display will
be superimposed over the screen (similar to Figure A-9). Use the number keys or cursor
keys to modify the tracking frequency for that PM item.
7.
Once you are done viewing or modifying this screen, press RESET to return to the main
Run menu.
Figure A-15. Run Mode Screen Showing “Slide Adjust Motor” in “Alert” Mode
When you clear the alert condition for a certain item, you automatically reset its current
value to zero. You cannot recall the previous value.
NOTICE