Wintriss SmartPAC 2, Руководство пользователя, Страница: 424 / 604

1128600 SmartPAC 2 with WPC 2000 Integration User Manual
C-10 Preventive Maintenance Monitor
symbols, etc. Pressing the CLEAR key clears the text. To create a custom name, do the
following:
a. To select letters or symbols: Use the up, down, left, and/or right cursor keys to
highlight the desired letter; then press ENTER.
b. To select numbers: Use the numeric keypad.
c. When finished, press function key
F6 (to the right of the LCD display). To cancel you
selection, press Reset. (For assistance in using the various keys, refer to Chapter 3 of
this manual.)
6.
After you have named the item, you are prompted to set the PM monitor tracking units.
You can select a time-based measure, such as: run hours, days, weeks, months; or you can
select measures linked to the process, such as: strokes, die changes, or programmable cam
channel cycles. Select the most applicable tracking unit of measure.
Figure C-9. Alphanumeric Display Superimposed over PM Names Screen
Figure C-10. Tracking Units Selection Screen
MORE
DAYS
WEEKS
MONTHS
STARTS/STOPS
STROKES
DIE CHANGES
CH1 CYCLES
CH 2 CYCLES
CH 3 CYCLES
CH 4 CYCLES
CH 5 CYCLES
CH 6 CYCLES
CH 7 CYCLES
CH 8 CYCLES
USE THE CURSOR KEYS TO
MAKE SELECTION. PRESS
ENTER TO SELECT, RESET
WHEN DONE.
SLIDE ADJ. MOTOR
select the
tracking unit
for the monitored
item
YOUR PRESS NAME PM MONITOR
RUN HOURS