manualshive.com logo in svg

Wintriss SmartPAC 2, Руководство пользователя

Поделиться
Скачать
Wintriss SmartPAC 2 Скачать руководство пользователя страница 307

SmartPAC 2 with WPC 2000 Integration User Manual

1128600

Program Mode

5-53

3.

Press RESET to return to the Main Program Menu.

Enabling or Disabling All Sensors

When you access the Sensor On/Off Status screen, a message is displayed on the second line 
of the screen beneath the screen title indicating whether sensors are enabled or disabled.  If the 
message is SENSORS ENABLED, the 

F5

 function key is labelled “Disable All Sensors.”  If 

the message is SENSORS DISABLED, 

F5

 is labelled “Enable All Sensors.”

When the message is SENSORS ENABLED, SmartPAC 2 is communicating with all the 
sensors that are programmed and turned on.  When the message is SENSORS DISABLED, 
SmartPAC 2 is not communicating with the sensors.

To enable or disable all sensors, do the following:

1.

On the Sensor On/Off Status screen, press 

F5

.

If the SENSORS DISABLED message is displayed, 

F5

 is labelled “Enable All Sensors,” 

and pressing 

F5

 enables all the sensors.

If the SENSORS ENABLED message is displayed, 

F5

 is labelled “Disable All Sensors,” 

and pressing 

F5

 disables all the sensors.

2.

Press RESET to return to the Main Program Menu.

Turning a Sensor Off or On

To turn a selected sensor Off or On, do the following:

1.

On the Sensor On/Off Status screen, highlight the sensor you want.

2.

Press ENTER to toggle between the OFF and ON settings until the setting you want is 
displayed.

3.

Press RESET to return to the Main Program Menu.

When a tool is loaded, or when SmartPAC 2 is powered up, all sensors are turned on and 
enabled.

You can also enable or disable all sensors in Run mode. See 

DISABLE (ENABLE) 

SENSORS

, page 6-6.

• Sensors that show an N/U status have not been programmed.  You cannot change their 

status.

• If you turn a sensor Off on the Sensor On/Off Status screen, the sensor will turn on 

when you reload the tool.

NOTICE

NOTICE

NOTICE

Содержание SmartPAC 2





























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды