P A G E
|
8
Wintex Agro, Vilhelmsborgvej 8C, DK-7700 Thisted
+45 97990800, [email protected], www.wintexagro.com
202203
The frame needs to be bolted down into these six mounting points. It might be necessary to put big washers underneath the frame to
reinforce the bed.
When the soil sampler is mounted, you need to loosen the position lock bolts on the frame and pull the inner frame backwards. When you
reach the stop, make sure that the position lock bolts engage in the holes to secure the soil sampler. Then release the position lock bolts
of the tilting frame and raise the soil sampler by hand into the working position. Make sure that the lock bolts engage.
The tilting part of the frame is locked with position lock bolts. You can adjust the angle so that you can tilt the soil sampler in a 90-degree
angle to the ground.
Depending on the size of the pickup you need to find a suitable mounting
position for the hydraulic unit. There is no harm in offsetting the soil
sampler to one side of the bed to make space for the hydraulic unit.
