Winters LM6, Инструкция по установке и эксплуатации

Страница: 3 / 10

LM6 Installation, Operation Manual
WINTERS INSTRUMENTS Tel: 1-800-WINTERS / www.winters.com 3
General information
Information on the Operating Manual
This operating manual contains important information on proper usage of the device. Read this operating manual
carefully before installing and starting up the pressure measuring device. Adhere to the safety notes and operating
instructions which are given in the operating manual. Additionally applicable regulations regarding occupational
safety, accident prevention as well as national installation standards and engineering rules must be complied with!
This operating manual is part of the device, must be kept nearest its location, always accessible to all employees.
This operating manual is copyrighted. The contents of this operating manual reflect the version available at the time
of printing. It has been issued to our best knowledge. However, errors may have occurred. Winters Instruments is
not liable for any incorrect statements and their effects.
NOTE: Technical modifications reserved
Symbols used
Y DANGER! – dangerous situation, which may result in death or serious injuries
Y WARNING! – potentially dangerous situation, which may result in death or serious injuries
Y CAUTION! – potentially dangerous situation, which may result in minor injuries
! CAUTION! – potentially dangerous situation, which may result in physical damage
NOTE – tips and information to ensure a failure-free operation
Target group
Y WARNING! To avoid operator hazards and damages of the device, the following instructions have to be
worked out by qualified technical personnel.
124,5
Ø7,4
Ø27
Range
Over-
pressure
Burst
Pressure
Code
50” H2O 15 psi 22 psi LM6W05
100” H2O 15 psi 22 psi LM6W10
150” H2O 15 psi 22 psi LM6W15
200” H2O 15 psi 22 psi LM6W20
300” H2O 15 psi 22 psi LM6W30
400” H2O 15 psi 22 psi LM6W40
0-5 psi 15 psi 22 psi LM6005
0-10 psi 44 psi 109 psi LM6010
0-15 psi 44 psi 109 psi LM6015
0-25 psi 87 psi 218 psi LM6025
0-50 psi 290 psi 218 psi LM6050
0-100 psi 290 psi 725 psi LM6100
0-200 psi 870 psi 1,740 psi LM6200
0-300 psi 1,450 psi 1,740 psi LM6300
Order Codes
Note: Measurements are in mm
Thermal Errors (Offset and Span)
Nominal
Pressure (psi)
<1 <4 <6 <15 >15
Tolerance Band
(% FSO)
<±2 <±1.5 <±1 <±1 <±0.75
TC, Average
(% FSO/10K)
±0.3 ±0.2 ±0.14 ±0.1 ±0.07
Compensated
Range 32°F to 122°F
0°C to 50°C
32°F to 158°F
0°C to 70°C