3
CONNECTION
ILLUSTRATION
CONNECTING AND OPERATION
How to connect the HDMI Repeater to your devices
1. Identify the input and output port of HDMI-110 main unit.
2. Connect the HDMI
TM
cable from the output port of HD source device to the HDMI
Repeater
’s input port.
3. Connect the HDMI
TM
cable from your display (monitor or projector) to the output port of
the HDMI Repeater.
4. When the connection is completed, the green LED on the repeater will be lighted up. If
the green LED and red LED both are lighted up, your connection is wrong, please
re-check the connection. (The red LED light indicates the wrong connection).
5. For better performance, the HDMI-110 Repeater is needed to connect to display closely.
If the cable length connected from HDMI-110 to display is too long, you may not have
picture on your display. Please use a shorter HDMI
TM
cable.
Attentions
The extending length may vary with different cable quality and source/display devices.
HDMI-110 is designed as a repeater with built-in high performance equalizer. When
using HDMI-110 to extend the HDMI
TM
signal, make sure the HDMI-110 is connected
close to your HD Display.
HDMI-110 supports only one direction signal stream. Please follow the connection
instruction.
HDTV
HDMI-110
HD DVD
INPUT
OUTPUT
Up to 50M
HDMI Cable
(24 AWG)
Standard length
HDMI Cable