WinSystems PPC65BP-1 Series, Руководство по эксплуатации продукта

Страница: 53 / 63

PPC65BP-1x/Frequently Asked Questions
v1.0 www.winsystems.com Page 53
10. Frequently Asked Questions
10.1 To what chemicals or compounds is the touch screen resistant?
The touch screen is resistant to the following chemicals and compounds.
10.2 If the password of the system BIOS is lost, how can you reset the system?
Reset the BIOS to factory configuration. See “Reset CMOS BIOS
Configuration” on page 54.
10.3 How can the system be configured for AT mode?
The default setting is ATX mode. This mode requires the power button to
be pressed to turn the system on. By configuring SW2 port 1 and
restarting the system, you can configure the system as AT mode. See “AT/
ATX & BIOS Recovery Setup (SW2)” on page 38. The illustration below
shows AT mode settings 1-4 ON, and 2-3 OFF.
Chemical item Oil item General item
Acetone Water-white mineral oil Ammonia cleanser
Butane Unleaded gasoline Clothing cleanser
Isopropanol Diesel fuel Vinegar
Hexane Engine oil Coffee
Turpentine Speed change oil Tea
Methanol Antifreeze Animal fat
Normal Saline
Salad oil
1
3
2
4
ON
1 2
ON