15
5.7 Helpful tips
i.
Unplug power connection immediately after use (Do not do it with wet hand or
naked foot).
ii.
The cleaner should not touch pool walls while lifting out to avoid scratching the pool
surface or any damage to the cleaner.
iii.
Before lifting out from pool and placing on the pool edge, suspend the cleaner
above water surface for 10-15 seconds to release the water left inside the cleaner
body.
iv.
Please hold the cleaner handle to lift it out from pool and never pull the cable.
. Trouble Shooting
Symptom
Possible reason
Corrective action
Cable twists or coils
up
Cable not fully released
Unplug power line and release cable
Nozzle in extra angle
Adjust water outlet into proper angle
Obstruction in pool
Remove obstruction in pool
Stuck on main drain outlet of
the pool
Turn off pool filter system
Long time working
Release manualy
Cleaner does not
reach all pool area
Power
supply
unit
improperly positioned
Place power supply in proper position so
that cleaner can reach all area
Nozzle in improper direction Adjust nozzle into proper direction
Customized pool shape
Adjust the nozzle to lead to bigger moving
radius
Pool filter system and pump
open
Turn off pool filter system
Cable not long enough in
pool
Release cable
Cleaner does not
work
Power cord not connected
well
Plug power cord and cable line
Damaged
during
transportation
Contact local vendor
Cleaner does not match
local rated voltage
Contact local vendor
