1
1
1
1
Instructions:
1. Move the pedestals (A) (B) to the desired location , insert and tighten
machine bolts (1-1/4")
(6 PCS)
to connect backpanel (C) to the pedestals (A) (B) .
2.Insert center Cross Bar (D) to the pedestals (A) (B) , tighten with
(1-1/4") flat head wood
screws
(2PCS).
1
1
CROSS BAR
DESK TOP
BACKPANEL
PEDESTAL
B
A
1 PC
1 PC C
1 PC
PEDESTAL
E
D
1 PC
1 PC
F
1 PC
GA166FT Parts List
GA166FB Parts List
Hardware List (included in GA166FB)
Caution
Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause
injury, therefore, for your protection, please remove any exposed staples used in packing.
Please keep all hardware parts out of the reach of children.
1.We recommend that you should assemble this product with the assistance of another person; this will make assembly easier,
and will help to eliminate damage to the product or injury to persons during assembly.
2.Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment.
3.Please do not over tighten screws or bolts.
4.Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your newly purchased
product correctly and efficiently.
DROP FRONT CENTER
DRAWER
6
PCS Machine Bolts(1-1/4")
2 PCS
Metal Grommet
2 PCS Keys For File Drawer Lock 3 PCS Long( 1-1/4") Flat Head Wood Screws
4 PCS Wood Dowels ( 8x25mm)
8 PCS
Short (1") Flat Head Wood Screws
