8-3
SECTION 8 –
ENTERTAINMENT
Play DVD with Theater Sound
•
Insert DVD into player. DVD will begin to
load automatically. TV screen will typically
show “READING” or “LOADING.”
•
The DVD may load directly
to the main title/menu
screen or it may begin to
play previews. You may be
able to skip previews if
desired by pressing the NEXT (CH+ / CH-)
button until you see the main menu screen.
•
When the main menu
screen appears, use the
arrow buttons on the
remote to select the desired
entry or press the OK or
PLAY buttons on the remote (or “Play” button
on DVD player) to begin playing the feature.
•
Volume is adjusted with the DVD remote (or
volume control on DVD player).
TV Sound Through Home Theater
Speakers
When watching TV programs (broadcast,
cable, or satellite), the TV normally plays sound
through its own built-in stereo speakers. To
connect TV sound output to home theater
speakers for a richer sound quality, follow these
steps:
•
Turn the TV and DVD player ON.
•
Select the TV channel you wish to watch.
•
Press FUNCTION button on DVD player or
remote to set DVD player to “AV IN.”
•
Use the TV Menu button to turn TV speaker
on or off, or if available, change audio output
to “Variable Audio Output.” (See TV owner’s
manual for instructions.) This will route TV
stereo sound output through the home theater
system.
•
Select TV channels to watch and adjust
theater speaker volume with remote for either
the TV or DVD.
NOTE: Turn the volume level up significantly on
the DVD player when using the home
theater as an amp for the TV through the
stereo system.
CD/DVD PLAYER - BEDROOM
(& Stereo Radio Alarm Clock)
–If Equipped
The TV operates from 120-volt AC household
current only, so you must have either the
shoreline connected, the generator running, or the
inverter turned on (if equipped).
The DVD player is connected to the TV and
plays through the TV stereo speakers.
Set TV Video Input
•
Turn TV and DVD player ON.
•
Press the SOURCE or INPUT button on the
TV or TV remote to select INPUT1 or AV1.
•
The TV screen will display the DVD player
logo when the correct input is selected.
Play DVD
•
Insert DVD into player. DVD will begin to
load automatically. TV screen will typically
show “READING” or “LOADING”.
•
The DVD may load directly to the main title/
menu screen or it may begin to play previews.
You may be able to skip previews if desired by
pressing the NEXT button until you see the
main menu screen.
•
When the main menu screen appears, use the
arrow buttons on the DVD remote to select the
desired entry or press the ENTER or PLAY
buttons on the remote (or “Play” button on
DVD player) to begin playing the feature.
ENTER
NEXT
