3-7
SECTION 3 –
DRIVING YOUR MOTORHOME
Further Information
See the collision avoidance system manual in
your InfoCase for complete features, operating
instructions, and safety precautions.
MIRRORS – POWER ELECTRIC
Always adjust mirrors for maximum rear
visibility before driving. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
Mirror Adjustment Control
The mirror control is mounted along sidewall
below driver side window. The ignition key must
be on to adjust the mirrors.
Mirror Heaters
The mirrors also contain heating elements to
defog or de-ice the mirror glass during cold
weather operation. An ON-OFF switch for the
mirror heaters is located on the driver side trim
panel.
•
ON - To turn mirror heat on, press the Mirror
Heat switch UP.
•
OFF - To turn mirror heat off, press the Mirror
Heat switch DOWN.
WARNING
The Collision Avoidance System is not a
substitute for Safe and Alert driving. Do
not attempt to change settings on the
Collision Avoidance System while driving.
Move Selector Switch L or R to select mirror.
Center “neutral” position disables arrows
to avoid unintentionally moving a mirror.
Press Arrow Buttons to move
mirror surface in direction indicated.
Mirror Heater Switch
(Located on dash)
-Typical View
