8-5
SECTION 8 –
ENTERTAINMENT
Video Source from HDMI Matrix
The audio and video signal from the HDMI
matrix is received by the sound bar and then sent
to the TV. Power on the sound bar and TV in
order to enjoy the desired video source from the
HDMI matrix.
•
Press HDMI 1 button on the sound bar remote.
•
Verify TV source is set to HDMI by pressing
source or input button on the TV remote.
•
Volume is controlled by the sound bar remote.
Video Source from TV (broadcast or
cable)
•
Press source or input button on TV remote and
select “Air” or “Cable”.
•
Press “TV Input” button on sound bar
remote.
•
Volume is controlled by the sound bar remote.
Listen to Music stored on a Bluetooth
device
•
Press the Bluetooth button on the sound
bar remote.
•
On your Bluetooth device, perform the
pairing operation. A list of devices found will
appear on your device. Select the Sound Bar.
•
Enter the PIN code 0000 (if required).
•
When the devices are paired, the Sound Bar
will display the device name.
•
Turn the Sound Bar volume up or down.
Bedroom TV with Sound Bar System
•
Turn on TV and ensure TV source is set to
HDMI by pressing the source or input button
on the TV remote.
•
Turn on the sound bar and set the input to
optical.
•
Volume is controlled by the sound bar remote.
NOTE: TV will operate without using the sound
bar if desired.
Exterior TV with Sound Bar System
•
Turn on TV and ensure TV source is set to
HDMI by pressing the source or input button
on the TV remote.
•
Turn on the sound bar and set the input to
optical.
•
Volume is controlled by the sound bar remote.
NOTE: TV will operate without using the sound
bar if desired.
Turning TV Speakers On/Off
TV speakers can be turned off to prevent an
echo effect when using an external speaker
(sound bar). Every TV is slightly different, refer
to the TV manufacturer’s user guide provided in
your InfoCase for detailed instructions on turning
TV speakers off.
Further Information
See the manufacturer’s user guide provided in
your InfoCase for complete feature descriptions
and operating instructions.
YAMAHA
®
SOUND BAR
SYSTEM
–If Equipped
The Sound Bar System operates from 120-volt
AC household current only, so you must have
either the shoreline connected, the generator
running, or the inverter turned on (if equipped).
The TV is connected to the Sound Bar.
Lounge TV with Yamaha
®
Sound
Bar System
To calibrate Yamaha Sound Bar
(if not previously calibrated)
NOTE: You will only need to calibrate your
system one time.
•
Turn “ON” the TV and Sound Bar.
•
Place the IntelliBeam microphone at the same
height as your ears would be when you are
seated.
•
Connect the IntelliBeam
microphone to the INTELLIBEAM
MIC jack at the front of the unit.
•
The calibration system will start
automatically. Follow the on-screen
instructions given to you by the system.
•
When calibration is complete, remove the
IntelliBeam microphone.