SECTION 12
– Furniture and Softgoods
12-2
Class A
SLEEPING FACILITIES
Couch Bed Conversion
Couch to Bed:
Pull the front edge of the couch seat upward
and outward from the wall while gently pushing
downward on the backrest until the cushions lie
flat. The bed is now ready for use.
Bed to Couch:
Push the front edge of the seat toward the wall
while lifting upward on the backrest until the
couch is fully seated against the wall.
Dinette/Bed Conversion
Dinette to Bed:
1. Release the catch on the table leg brace and
fold the leg up against the bottom of the table.
2. Remove the table from the wall support
bracket by lifting the end of the table. Then
lower the table to rest on the cleats attached to
each dinette bench.
3. Arrange dinette cushions to cover bed area.
Bed to Dinette:
1. Replace the table onto the wall support and
lower the table leg.
2. Make sure that the table leg is secured into the
floor support bracket and the leg brace is
locked.
DAY/NIGHTER PLEATED
BLINDS
Your coach may feature two-stage pleated
window blinds that can be used for daytime or
nighttime privacy.
Sun Filter:
The lower section is a translucent white shade
that can be lowered for privacy without
darkening the inside of the coach. It can also filter
out harsh direct sunlight to help keep the inside of
the coach cool in summer or to disperse light for
houseplants.
WARNING
Do not use sleeping facilities while vehicle
is moving.