SECTION 4 –
APPLIANCES AND SYSTEMS
4-6
ROTARY PUSH BUTTON:
used to select
menu items and to adjust settings.
•
Turn clockwise or counterclockwise to scroll
through the menu.
•
Turn clockwise to increase values (+) and
counterclockwise to decrease values (-).
•
Tap to save a selected value.
•
Press for three (3) seconds to turn the control
panel on/off.
BACK BUTTON:
used to go back to the previ-
ous menu or to cancel a setting.
Further Information
Refer to the manufacturer’s user guide
provided in your InfoCase for complete operating
instructions, safety precautions, troubleshooting,
and maintenance information.
ROOF AIR CONDITIONING
SYSTEM
Cooling Operation
•
Turn the selector switch to the “Low Cool” or
“High Cool” position.
•
Rotate the temperature control to the position
that is the most comfortable to you. When the
temperature of the air entering the air
conditioning unit rises a few degrees above
the setting you have selected, the thermostat
will turn the compressor on. When the
temperature of the air entering the air
conditioning unit drops below the selected
setting, the thermostat will turn the
compressor off. When the air conditioner is in
the cooling mode, it will continue to cycle the
compressor on and off until the selector
switch is turned to another operation mode.
Control Panel
(Located near monitor panel)
-Typical View
1. Display
2. Status Line
3. Menu Line (top)
4. Menu Line (bottom)
5. Power supply display 120VAC (mains
supply)
6. Time Switch Display
7. Settings/Values
8. Rotary Push Button
9. Back Button
• Energy
Mode
• Select Fan
Speed
• Room
Temperature
• Hot Water
Temperature
Menu Line (top)
• Removable Filters
