SECTION 3 –
DRIVING YOUR MOTOR HOME
3-6
Refer to the Solar/Night Shade
manufacturer’s information provided in
your InfoCase.
Further Information
Refer to the manufacturer’s user guide
provided in your InfoCase for complete operating
instructions, troubleshooting tips, and
maintenance care.
MIRRORS – POWER ELECTRIC
–If Equipped
Always adjust mirrors for maximum rear
visibility before driving off. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
Mirror Adjustment Control
The mirror control is located on the driver side
armrest panel or the dash. The ignition key must
be on to adjust the mirrors.
Mirror Heaters
The mirrors may also contain heating
elements to de-fog or de-ice the mirror glass
during cold weather operation. An ON-OFF
switch for the mirror heaters is located near the
remote mirror controls.
Mirror Arm/Head Adjustment
If you cannot adjust a mirror properly using
the control switch, the mirror may need a coarse
adjustment by rotating the mirror head.
NOTE: Set screws may be located on the
opposite side of the mirror arm.
Passenger side mirror is similar.
Move Selector Switch L or R to select mirror.
Center “neutral” position disables arrows
to avoid unintentionally moving a mirror
Press Arrow Buttons to move
mirror surface in direction indicated
Mirror Heat Switch
(Located on driver side trim panel)
-Typical View
Mirror Head Pivot Lock
Loosen Allen head set screw
to pivot mirror head.*
(Torque 75-100 in/lbs)