3-11
SECTION 3 -
DRIVING YOUR MOTOR HOME
To close, pull hood down and push in with
palms of hands on sides to secure latches. You
will hear the hood latches “click” when engaged
in the locked position.
ENGINE ACCESS – INTERIOR
Front Engine Cover
•
To remove the engine cover,
insert the
supplied hex wrench into the hole in the top
center or the front edge of the engine cover
(depending on model).
Turn the hex wrench to the left (counter-
clockwise) to unlatch.
NOTE: On some models there may also be
screws to remove at the lower front
corners. See following photo.
•
Lift the rear end of the cover upward and slide
rearward, then pull the cover from the
opening.
Front Hood Latch
Insert hex wrench into the hole on the
top center of the engine cover (as
shown) or the front edge of engine
cover to unlatch
-Typical View
Remove screws on both
sides of engine cover
-Typical View