SECTION 9 –
FURNITURE AND SOFTGOODS
9-8
NOTE: The Sleep Number bed operates on 120-
volt AC household current only, so you
must have the shoreline plugged in or the
generator running to adjust the air
pressure settings in this bed.
Further Information
For further information and operating
cautions, see the Sleep Number bed operating
instructions included in your InfoCase.
BED - POWER LIFT
–If Equipped
Your coach may be equipped with a power
lift/lower mechanism that raises and lowers the
head of your bed to best suit your comfort needs.
The power lift/lower control switch is located
on the bedroom nightstand (some models may be
equipped with a switch on each nightstand).
•
Press the control switch UP to raise the head
of the bed.
•
Press the control switch DOWN to lower the
head of the bed.
NOTE: This power lift/lower mechanism is
equipped with an interlock feature, which
will not allow you to retract the bedroom
slideout unless the bed is in the fully
upright position. The bed will also not
recline unless the slideout is fully
extended.
BUNK BEDS - FOLDING
–If Equipped
(Typical view – your coach may differ)
Folding Down Bunk to Create
Wardrobe Space:
1. Remove top bunk cushion and lay on top of
bottom bunk cushion.
2. Lift up bunk board and align the latch with the
wall bracket.
Power Lift/Lower Control Switch
(Located on Bedroom Nightstand)
-Typical View
WARNING
Keep people away from operating
mechanism and pinch hazard areas
during use. Failure to do so could cause
injury.
CAUTION
No bunk bed/wardrobe exit when
slideroom is “in”.
