Winmate R15IK3S-POC3, Руководство пользователя

Страница: 21 / 76

21
Chapter 3: Getting Started
3.4.4 RJ-45 Connector
The panel PC supports one RJ45 10/100/1000 Mbps Ethernet interface for connecting to the
internet.
3.4.5 HDMI Connector
Use HDMI connector to connect your Panel PC to external display.
3.5 Configuring Serial Port Settings
Serial port COM1 can be configured for RS-232, RS-422 or RS-485.Jumpers are located on the
motherboard. You need to open the housing in order to access the jumpers.
CAUTION/ ATTENTION
It is recommended to use factory jumper settings. Opening the housing when
it is sealed may damage the device and its parts.
Il est recommandé d’utiliser la configuration d’usine de cavalier. Ouvrir le
chassis lorsqu’ilestscellépeut endommagél’appareil et ses pièces.
NOTE:
A pair of needle nose pliers may be helpful when working with jumpers. If
you have any doubts about the best hardware configuration for your
application, contact your local distributor or sales representative before you
make any changes. Generally, you simply need a standard cable to make
most connections.
Pin №
Signal Name
Pin №
Signal Name
1 TX1+ 2 TX1-
3 TX2+ 4 TX2-
5 TX3+ 6 TX3-
7 TX4+ 8 TX4-
Pin №
Signal Name Pin
№
Signal Name
1 TMD 2 GND
3 TMDS_DATA2- 4 TMD
5 GND 6 TMDS_DATA1-
7 TMD 8 GND
9 TMDS_DATA0- 10 TMD
11 GND 12 TMDS_CLOCK-
13 CEC 14 NC
15 DDC_CLOCK 16 DDC_DATA
17 GND 18 5V
19 Hot Plug Detect