5
Preface
Safety Precautions
For your safety carefully read all the safety instructions before using the device. All cautions and
warnings on the equipment should be noted. Keep this user manual for future reference.
CAUTION/ATTENTION
Do not cover the openings!
Ne pas couvrir les ouvertures!
*
Let service personnel to check the equipment in case any of the following
problems appear:
o
The power cord or plug is damaged.
o
Liquid has penetrated into the equipment.
o
The equipment has been exposed to moisture.
o
The equipment does not work well or you cannot get it to work according to the user
manual.
o
The equipment has been dropped and damaged.
o
The equipment has obvious signs of breakage.
•
Do not leave this equipment in an uncontrolled environment where the storage temperature is
below -20°C (-4°F) or above 60°C (140°F). It may damage the equipment.
CAUTION/ATTENTION
Use the recommended mounting apparatus to avoid risk of injury.
Utiliser l’appareil de fixation recommandé pour éliminer le risque de blessure.
WARNING! / AVERTISSEMENT!
Only use the connection cords that come with the product. When in doubt, please
contact the manufacturer.
Utiliser seulement les cordons d’alimentation fournis avec le produit. Si vous
doutez de leur provenance, contactez le manufacturier.
WARNING!/ AVERTISSEMENT!
Always ground yourself against electrostatic damage to the device.
Toujours vérifier
votre mise à la terre afin que l’équipement ne se décharge pas
sur vous.
Special Conditions of Use
•
Subject device has been evaluated to the enclosure requirements for Ingress Protection
IP65 in accordance with EN 60079-15. All external connections must be Ex certified with
minimum IP65 degree of protection. Suitability of wiring must be determined in end-use
applications. Box cover does not have an IP rating.
•
The equipment shall only be used in an area of not more than pollution degree 2, as
defined in EN 60664-1.
•
Transient protection shall be provided that is set at a level not exceeding 140 % of the
peak rated voltage value at the supply terminals to the equipment.
General Guideline
It is recommended to reboot the device when some functions are defect or inactive. If it still can't
solve the problems, please contact your dealer or agent.
