Winmate R08IB3S-VMU1, Быстрый старт

Страница: 14 / 28

- 14 -
Getting Started
Turning On Your Device
To turn on the Panel PC:
1. Connect the Panel PC to the source of power.
2. Press the power on switch to turn the Panel PC on.
3.
Press “DEL” to enter the CMOS setting and check the BIOS setup.
Connecting to DC Power Source
1 . Connect the 3-pin terminal
block.
2. Screw the Terminal block to fix the
cable.
3. Connect terminal block to the Panel PC.
“+”
Connect to power supply until 0V.
“
-
”
Connect to power supply until it get 9~36V DC.
The device is ready to work once is connected to the source of power.