47
Chapter 4: AMI BIOS Setup
4.2.5 Boot Configuration
The Boot menu sets the sequence of the devices to be searched for the operating system. The
bootable devices will be automatically detected during POST and shown here, allowing you to set
the sequence that the BIOS uses to look for a boot device from which to load the operating
system.
BIOS Setting
Description
Setting Option
Effect
Setup Prompt
Timeout
Allows user to
configure the
number of
seconds to stay in
BIOS setup
prompt screen.
Enter
Set the prompt
timeout
Boot NumLock
State
Enables or
disables NumLock
feature on the
numeric keypad of
the keyboard after
the POST
(Default: On).
On
Remains On
Off
Remains OFF
Quite Boot
Determines if
POST message
or OEM logo
(default = Black
background) is
displayed.
Disabled
Disables this
function
Enabled
Enables this
function
