17
Chapter 2: Installation
2.1.2 Yoke Mount
Yoke Mount solution allows installing the Panel PC on the yoke stand (not supplied by
Winmate).
Installation Instruction
1. Place the Panel PC on the bracket stand, aiming screw holes for each other.
2. Secure screws to fix the device upon the bracket stand.
3. Firmly secure the locking handle to the Panel PC.
2.2 Connecting Peripherals
This B Series Panel PC has waterproof connectors with protection caps: M12 power connector,
M12 GigaLAN connector, M12 RS232 connector, M12 USB connector, two M12 connectors for
push button extension and one waterproof connector USB2.0 type-A
(15” up). The pin
assignment of the connectors is described in this section.
Important:
To maintain the IP65 rating of the full unit it is recommended to
use only IP65 waterproof cables. You must remember to firmly close all
protective caps when connector is not used.
Note:
Notice that input and output connectors vary by product size and
specifications.
