![WinGD X82-B Скачать руководство пользователя страница 155](http://html1.mh-extra.com/html/wingd/x82-b/x82-b_maintenance-manual_986581155.webp)
Fig 6-23
Thrust device
00613
001
002
004
003
002
008
006
006
005
Copper paste
007
WARNING
Injury Hazard: The thrust device has a WLL of only 70 kg. Do not use the thrust device to
lift the bearing cover. Injury to personnel can occur.
6
NOTE:
Use only the lifting plate (005) to move and install the thrust device (004).
Put the thrust device (004) in position on the bearing cover (002).
7
Move the lifting plate (0055) to its stowage position.
8
Apply copper paste to the thread and the surface of the screw (008).
9
Open the vent screw (007) and make sure that the piston (006) is fully engaged.
10
Make sure that the tappet (003) and the piston (006) fully engage with the cut-outs of
the bearing cover (002).
11
Connect the HP oil pump 94931 to the thrust device (004).
12
Operate the HP oil pump.
13
When oil that has no air flows out, close the vent screw (007).
14
Slowly increase the pressure to the correct value, refer to the name plate.
15
Manually tighten the vent screw (007).
16
Release the pressure to zero.
17
Remove the HP hose from the thrust device (004).
18
Attach the shackle 94019L (004,
) to the column.
19
Attach the manual ratchet 94016-012 (003) to the shackle (004).
20
Attach the roller support 94117A (001) to the position shown. Make sure that the spring
clip (005) locks the pin (006) in position.
21
Put the chain of the manual ratchet (003) through the roller support (001).
X82-B
AA00-1132-01AAB-520A-A
Maintenance Manual
Main bearing cover - No. 2 to # - remove
Winterthur Gas & Diesel Ltd.
- 155 -
Issue 001 2020-10
Содержание X82-B
