WINEL Musketeer Hatch, Инструкция по установке, эксплуатации и обслуживанию

Страница: 22 / 22

7 Troubleshooting
Warning:
Always read the safety instructions in section
Safety and warranty
on page 6
before trouble shooting.
Do not endanger people and the environment. Obey the safety instructions.
Fault Possible cause Check Remedy
Hatch cannot be
opened or closed with
handle
Bolts in cleating sys-
tem come loose
Cleating system Place new bolts/nuts
(apply locking fluid)
Safety bolt of handle is
broken
Safety bolt operating
handle
Place new bolt
(apply locking fluid)
Hatch does not close
well
Damage on frame,
hatch, rubber gasket,
musketeer system,
frame is bent
Complete system,
hatch, rubber gasket
and frame
Repair and/or replace
damaged pieces
and/or parts. Then ad-
just cleating system
and hinges
Hatch is leaking Rubber gasket is com-
pressed too little
Rubber gasket, cleat-
ing and hinges
Replace rubber gasket
and/or adjust cleating
system and hinges
Damage on frame,
hatch, rubber gasket,
musketeer system,
frame is bent
Complete system,
hatch, rubber gasket
and frame
Repair and/or replace
damaged pieces
and/or parts. Then ad-
just cleating system
and hinges
Handle not operating
correct and/or to heavy
Rubber gasket is com-
pressed too much
Compression of the
rubber gasket when
the hatch is closed and
latched
Adjust cleating system
and hinges
No grease on wedges Wedges Apply grease to wedg-
es
Sticking of handle in
bush
Handle Disassemble handle
and clean or replace
handle and/or bushes
Cleating rod is bended Cleating system Repair or replace dam-
aged parts
Damage on frame,
hatch, rubber gasket,
musketeer system,
frame is bent
Complete system,
hatch, rubber gasket
and frame
Repair and/or replace
damaged pieces
and/or parts. Then ad-
just cleating system
and hinges
Paint on system parts Parts that should not
been painted for paint
Remove the paint
If the problems cannot be solved using the instructions in the manual, contact WINEL
After-sales department.
Troubleshooting
22 22 - 001 - 15.01.2021