WINEL Musketeer Hatch, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 22

6.2.2 Adjust the cleats
Note: The rubber gasket must be compressed 3-4 mm to make the door or
hatch watertight.
Procedure
1. On all cleats, turn the hexagonal nut
(A) a quarter of a turn.
a) Clockwise to increase the
compression of the rubber
gasket.
b) Counterclockwise to decrease
the compression of the rubber
gasket.
2. Repeat the previous step until the
compression of the rubber gasket is
correct for all cleats.
6.2.3 Adjust the hinges
Procedure
1. Close the hatch. Make sure that the
hatch is latched.
2. On all hinges, loosen the nuts (A).
3. Make sure that the hinge height is
correct and tighten the nuts.
--
+
A
A
Maintenance
22 - 001 - 15.01.2021 17