Wincor Nixdorf TH420, Руководство пользователя

Страница: 46 / 64

En ab le or dis ab le check flip test mode
The check flip test verifies that the check flip mechanism will flip an inserted
check only. It does not read the check. Check flip test is enabled or disabled
by selecting the “Diagnostic Modes” sub-menu of the configuration menu.
See “Configuring the printer” for instructions
on how to enter the configuration menu.
To run the check flip test mode
n
Enable the check flip test mode.
n
Exit the configuration menu.
n
Insert a check, lengthwise and face down into the slip station as if
validating. (See “Verifying and validating checks” )
COM MU NI CA TI ON IN TER FA CE
40
Check guide
Ex ten ded slip table
Slip table
Pa per feed
button
Green slip-in LED
Check orien ta ti on - face down
Do not fold check.