Wincor Nixdorf TH420, Руководство пользователя

Страница: 36 / 64

To print on a form or check
n
Insert the form or check (check shown in the illustration) from the front
and place it on the slip table with the print side up. If the form is extra
long, you may need to insert it from the side. A slight resistance may be
felt when the form comes in contact with the form stop.
n
Slide the form or check to the right until it aligns against the check guide.
n
Slide a short form or check toward the back of the printer until it contacts
the form stop (it will not be able to go any further).
For a long form, position it appropriately using the first line of print guide
on the left side of the printer.
The green slip-in LED on the slip table turns on when the form or check is
properly inserted (the form has to cover two sensors on the slip table).
n
Follow the instructions from the host computer. The printer begins
printing.
n
Remove the form or check after it has been fed back out.
n
Follow the instructions from the host computer to finish the transaction.
PRINTING ON FORMS OR CHECKS
30