Test the prin ter
The test prints a list of various printer settings (Diagnostic form) and partially
cuts the paper if a knife is installed (see sample on next page). The test
printout items may vary depending on the printer model. This printout may
be useful to a service representative if there is a problem. If something
appears to be wrong with the test printout (such as missing or faded text),
see the section "Troubleshooting" in this document.
At the end of the test printout are instructions how to enter the configuration
menu.
The configuration menu allows you to change the current settings of the
printer.
n
To run the test, either:
Open (1) then while holding down the paper feed button, close the receipt
cover (2).
Open receipt cover.
Push and hold paper feed button
while closing receipt cover.
OR
n
Press the paper feed button and the reset button at the same time. The
Diagnostic printout will print.
CON NECT THE CA BLES
26
Содержание TH420
