Wincor Nixdorf TH320, Руководство программиста

Страница: 59 / 157

TH320/TH420 Programmers Guide
51
Print raster monochrome graphics
ASCII GS 0x82 n 1…..n72 (576 dots) for 80 mm paper, or n80 (640 dots) for 82.5 mm paper
Hexadecimal 1D 82 n 1…..n72 (576 dots) for 80 mm paper, or n80 (640 dots) for 82.5 mm paper
Decimal 29 130 n 1…..n72 (576 dots) for 80 mm paper, or n80 (640 dots) for 82.5 mm paper
Value and range of n
n 1 to n72/ n80 corresponds to one dot row data for a thermal
receipt printer.
Each bit defines whether or not a dot of the current color will be printed. This command is used for
printing a monochrome graphic in real-
time. Offsets, page and any other modes
or overlays, including watermark do not apply and are overridden by this command. A complete rendering
of the intended final image should have been done by the application before sending the dot rows. If
two-color paper is indicated by the set paper type command, then the raster will be printed in the color
that is defined by the set current color command.
Print raster color graphics
ASCII
GS 0x83 n 1…..n 144 (576 dots 80 mm paper) /n 160 (640 dots, 82.5 mm paper)
Hexadecimal 1D 83 n 1…..n 144 (576 dots 80 mm paper) /n 160 (640 dots, 82.5 mm paper)
Decimal 29 13n 1…..n 144 (576 dots 80 mm paper) /n 160 (640 dots, 82.5 mm paper)
Value and range of n
n1ton144/n160 corresponds to one dot row data.
For each printed dot row starting at the top left, two-part bit strings are used to define (in the first half) all
dots that are of either color (i.e. not white).
The second half string defines only the dots where the color = black. Thus all dots which are on in the
first half string but not on in the second half string, select the secondary color. The parameter of this
command is thus a string of bytes for one dot row with the same structure as defined for the thermal
color format file given in the download color logo command.
This command is used for printing a single raster of color graphics in real-time. Offsets, page and any other
modes or overlays, including watermark, and current color do not apply to this command. A complete
rendering of the intended final image has to be done by the application before sending the dot rows.
Print raster color graphics
ASCII GS 0x83 n 1…..n 144 (576 dots 80 mm paper) / n 160 (640 dots, 82.5 mm paper)
Hexadecimal 1D 83 n 1….n 144 (576 dots 80 mm paper) / n 160 (640 dots, 82.5 mm paper)
Decimal
29 13 n 1…..n 144 (576 dots 80 mm paper) / n 160 (640 dots, 82.5 mm paper)
Value and range of n
n 1 to n 144 / n 160 corresponds to one dot row data.
For each printed dot row starting at the top left, two-part bit strings are used to define (in the first half), all
dots that are of either color (i.e. not white). The second half string defines only the dots where the color =
black. Thus all dots which are on in the first half string but not on in the second half string, select the
secondary color. The parameter of this command is thus a string of bytes for one dot row with the same
structure as defined for the thermal color format file given in the download color logo command.
This command is used for printing a single raster of color graphics in real-time. Offsets, page and any other
modes or overlays, including watermark, and current color do not apply to this command. A complete
rendering of the intended final image has to be done by the application before sending the dot rows.
, * +