Wincor Nixdorf TH250, Руководство программиста

Страница: 41 / 182

TH250 Programmer’s Guide
36
Sets an idle time after which switching between communication ports can be done without a
power cycle. Setting seconds to 0 disables port idle timeout.
Print and paper feed
The print and feed commands control printing on the receipt and paper feed by the printer.
Print and feed paper one line
ASCII LF
Hexadecimal 0A
Decimal 10
Prints one line from the buffer and feeds paper one line.
Carriage return/line feed pair prints and feeds only one line.
Print and carriage return
ASCII CR
Hexadecimal 0D
Decimal 13
Prints one line from the buffer and feeds paper one line. The printer can be set through the
configuration menu to ignore or
use this command. Some applications expect the command to be ignored while others use it as
print command.
Related information
See ignoring/using the carriage return in Diagnostics for more information. This command is
ignored in LEGACY emulation.
Carriage return/line feed pair prints and feeds only one line.
Feed n print lines
ASCII DC4 n
Hexadecimal 14 n
Decimal 20 n
Value of n : The number of lines to feed at current line
height setting.
Range of n : 0–255 in Native mode
0–127 in A793 emulation
Feeds the paper n lines at the current line height without printing. Ignored on receipt if current line
is not empty.
Related information
This is ignored in LEGACY emulation and the parameter byte goes into the print buffer.